Control Unit TX-5000
Fully-programmable control box containing a radio transmitter/receiver module, the control and programming circuits managed and supervised by a last-generation 16-bit microcontroller, a 36-key membrane keyboard and a EXTRA-LARGE GRAPHIC LCD, with LED back-light and high-resolution (320x240 pixels, 1/4VGA). This box is the main console used both to program the sequences, line numbers and times during set-up and to control the fire during the show execution. From this console, the operator can AT ANY MOMENT (even with the show already wired and programmed), change the firing sequences, the firing time, adding or removing lines or entire sequences, checking the battery voltage, the radio propagation conditions, the line’s ohmic resistance. All these operation can be made REMOTELY thanks to the COMPLETE, BUILT-IN TELEMETRY SYSTEM. AS an additional NEW FEATURE, the TX5000 allows the test, modification and programming of all the 48 lines of a remote unit AT ONCE with all parameters available on-screen. The operator has choice between “manual” or “automatic with PC download” programming modes.
